Forensic Mapping
Sokkia Total Station 30R3
stations | series 10 | series 30R | series 30R3
SRX Full Robotic | SRX on Demand

The Series 30R3 Reflectorless Total Stations provide the longest phase EDM range on the market—up to 350m (1148 ft.) of reflectorless range. With its patented RED-tech EDM technology, the Series30R3 uses a truly narrow-beam EDM, regardless of target type, and automatically attenuates the signal when standard glass prisms or reflective sheet targets are selected. High-precision reflectorless distance measuring with a narrow-beam visible laser Ability to measure through obstacles such as chain-link fences and trees Compatibility with prisms for long-range measurements Superior performance in tough environments

Telescope Fully transmitting, Coaxial sighting and distance measuring optics.
Magnification 30x
Resolving power 2.5"
Field of view 1°30" (26m/1,000m)
Minimum focus 1.3m (4.3ft)
Angle measurement Photoelectrical absolute rotary encoder scanning. Both circles adopt diametrical detection.
Unit H&V Degree / Gon / Mil, selectable
Display resolutions H&V 1" / 5", 0.2mgon/1mgon, 0.005 mil, selectable
Accuracy (ISO12857-2 1997) H&V SET230R3 - 2" (0.6mgon) SET330R3 - 3" (1mgon) SET530R3 - 5" (1.5mgon) Measurement mode H:Clockwise / Counterclockwise, 0 set, Hold, angle input, repetition, available V:Zenith 0°, Horizontal 0° ±, slope in %, selectable
Automatic dual-axis-compensator Range: ±3' (±55mgon), "out-of-range " warning display provided
Distance measurement Modulated laser, Laser diode, Coaxial EDM transmitting and receiving optics (IEC Class 3R, FDA Class 3R laser)
Maximum measuring range A: Average conditions: slight haze, visibility about 20km (12miles), sunny periods, weak scintillation. B: Good conditions: no haze, visibility about 40km (25miles), overcast, no scintillation.
Reflectorless *1A SET230R3/SET330R3/SET530R3 - 350m (1,140ft.)
With reflective sheet A 500m (1,640 ft.)
With one AP01 prism G SET230R/SET330R/SET530R - 5,000m (16,400 ft.)
Unit Meters / Feet / Inch, selectable
Display resolution 0.001m (0.01 ft. / 1/8 inch)
Accuracy
Reflectorless *1 .3 to 200m: ±(3 + 2ppm x D)mm Over 200 to 350m: ±(5 + 10ppm x D)mm
With reflective sheet ±(3+ 2ppm x D)mm
With AP prism ±(2 + 2ppm x D)mm
Measuring time Every 1.3s (initial meas. 2.6 s)
Measurement mode Fine meas. (single/repeat/average) / Rapid (single), Tracking
Laser Wavelength: 635 - 690 nm, Max. output:0.99mW
Data storage and transfer
Internal memory About 10,000 points
Memory card unit*2 Optional. The 8MB CF card stores approximately 72,000-point data
Scale factor setting 0.5 to 2.0
Interface Asynchronous serial, RS-232C compatible, baud rate : 1,200 to 38,400 bps
Printer output Centronics compatible (w/ optional DOC46 printer cable)
General
Laser-pointer function ON (automatic off 5 minutes after operation) / OFF, selectable
Display type Alphanumeric/graphic dot matrix LCD (192x80 dots)
Keyboard (15keys) On both faces
Wireless keyboard Optional
Sensitivity of levels
Plate level SET230R3 - 20" 2mm SET330R3/SET530R3 - 30" / 2mm
Circular level 10' / 2mm
Graphic LCD level 3' outer circle
Optical plummet Image: Erect, Magnification: 3x, Minimum focus: 0.3m (0.98 ft.)
Water and dust resistance Conformity to class IP66 (IEC60529)
Operating temperature -20°C to +50°C C (-4°F to +122° F)
Tilting / Trunnion axis height 236 mm (9.3 in.) from tribrach bottom, 193 mm (7.6 in.) from tribrach dish.
Size with handle and battery W 165xD 170x H 341 mm (W 6.5 x D 6.7 x H 13.5 in.)
Weight with handle and battery 5.4kg (12lb.)
Power supply - Operating voltage: 7.2 V DC
BDC46A detachable battery Li-lon rechargeable battery
Continuous use*3 About 5.5 hours (About 650 points)
Recharging time Less than 2 hours with CDC61/62/64
Battery level display 4 steps with warning message
Automatic power cut-off 30 / 15 / 10 / 5 minutes after operation / OFF, selectable
Resume function ON / OFF selectable (backed up for about 1 week)