Forensic Mapping
Sokkia Total Station 30R
stations | series 10 | series 30R | series 30R3
SRX Full Robotic | SRX on Demand

Its extremely narrow, visible, red laser truly sets the Series 30R apart. With its small diameter, the laser pinpoints and accurately measures difficult positions such as small objects, edges of walls, or targets located at a steep angle. High-precision reflectorless distance measuring with a narrow-beam visible laser Ability to measure through obstacles such as chain-link fences and trees Compatibility with prisms for long-range measurements Superior performance in tough environments

Telescope Fully transmitting, Coaxial sighting and distance measuring optics.
Magnification SET330R/SET530R - 30x SET630R - 26x
Resolving power SET330R/SET530R - 3" SET630R - 3.5"
Field of view 1°30" (26m/1,000m)
Minimum focus 1.3m (4.3ft)
Angle measurement Photoelectrical absolute rotary encoder scanning. Both circles adopt diametrical detection.
Unit H&V Degree / Gon / Mil, selectable
Display resolutions H&V 1 / 5", 0.2mgon/1mgon, 0.005 mil, selectable
Accuracy (ISO12857-2 1997) H&V SET330R - 3" (1mgon) SET530R - 5" (1.5mgon) SET630R - 6" (1.9mgon)
Measurement mode H:Clockwise / Counterclockwise, 0 set, Hold, angle setting, repetition V:Zenith 0°, Horizontal 0° ±90°, slope in %
Automatic dual-axis-compensator Range: ±3' (±55mgon), "out-of-range " warning display provided
Distance measurement Modulated visible LASER, Laser diode, Coaxial EDM transmitting and receiving optics (IEC Class 2, FDA Class ll LASER)
Maximum measuring range A: Average conditions: slight haze, visibility about 20km (12miles), sunny periods, weak scintillation. B: Good conditions: no haze, visibility about 40km (25miles), overcast, no scintillation.
Reflectorless *1A SET230R/SET330R/SET530R - 150m (490ft.) SET630R - 100m (320ft.)
With reflective sheet A 500m (1,640 ft.)
With one AP01 prism G SET230R/SET330R/SET530R - 5,000m (16,400 ft.) SET630R - 4,000m (13,000 ft.)
Unit Meters / Feet / Inch, selectable
Display resolution 0.001m (0.01 ft. / 1/8 inch)
Accuracy
Reflectorless *1 ±(3 + 2ppm x D)mm
With reflective sheet ±(3 + 2ppm x D)mm
With AP prism ±(2 + 2ppm x D)mm
Measuring time Every 1.3s (initial meas. 2.6 s)
Measurement mode Fine meas. (single/repeat/average) / Tracking
Laser Wavelength: 635 - 690 nm, Max. output:0.99mW
Data storage and transfer
Internal memory About 10,000 points
Memory card unit*2 SET330R/SET530R - Optional SET630R - -
Scale factor setting 0.5 to 2.0
Interface Asynchronous serial, RS-232C compatible, baud rate : 1,200 to 38,400 bps
Printer output Centronics compatible (w/ optional DOC46 printer cable)
General
Laser-pointer function ON (automatic off 5 minutes after operation) / OFF, selectable
Display type Alphanumeric/graphic dot matrix LCD (192x80 dots)
Keyboard (15keys) SET330R/SET530R - On both faces SET630R - On one face
Wireless keyboard SET330R/SET530R - Optional SET630R - -
Sensitivity of levels
Plate level SET330R/SET530R - 30" / 2mm SET630R - 40" / 2mm
Circular level 10' / 2mm
Graphic LCD level SET330R - 3' outer circle SET530R/SET630R - -
Optical plummet
Image: Erect, Magnification: 3x, Minimum focus: 0.3m (0.98 ft.)
Water and dust resistance Conformity to class IP66 (IEC60529)
Operating temperature -20°C to +50°C C (-4°F to +122° F)
Tilting / Trunnion axis height 236 mm (9.3 in.) from tribrach bottom, 193 mm (7.6 in.) from tribrach dish.
Size with handle and battery W 165xD 170x H 341 mm (W 6.5 x D 6.7 x H 13.5 in.)
Weight with handle and battery 5.3kg (11.7lb.)
Power supply - Operating voltage: 7.2 V DC
BDC46A detachable battery Li-lon rechargeable battery
Continuous use*3 About 5 hours (About 600points)
Recharging time Less than 2 hours with CDC61/62/64
Battery level display 4 steps with warning message
Automatic power cut-off 30 / 15 / 10 / 5 minutes after operation / OFF, selectable
Resume function ON / OFF selectable (backed up for about 1 week)